Ribone is a commercial upholstery fabric, with stain and abrasion resistance. It has a textured surface, and is most commonly used for furniture coverings.

Suitable for: Upholstery

Weight: 470gsm

Width: 140cm

Composition: Polyester

Washing instructions: Wash in luke warm water at or below 40 degrees celcius on gentle cycle. Line dry out of direct sunlight. Low iron on reverse side of print. Dry cleanable.

ribone

 

Test Results

Prints on our base fabrics have been tested by an accredited laboratory.
Abrasion Resistance – Martindale (AS2001.2.25-2006, 12kPa)
Base Fabric Printed
30,000 cycles, Satisfactory appearance. Class 4
Seam slippage – standard seam (AS2001.2.22A-2006, CRE)
@180N, 4mm warp, 3.8mm weft, (Required 6 max)
Colourfastness to light – Xenon arc (ISO 105-B02, blue std 5)
Rating 6 (Required 5/6(min))
Colourfastness to rubbing (AS2001.4.3-1995)
Dry 5 (Required 4(min))
Wet 4/5 (Required 4(min))
Colourfastness to shampoo (AS2111.19.2)
Colour change 5 (Required 4(min))
Staining multifibre 5 (Required 3/4(min))
Colourfastness to water (AS2001.4.E01-2001)
Colour change 5 (Required 4(min))
Staining multifibre 5 (Required 3/4(min))
Colourfastness to drycleaning solvent (AS2001.4.16-1981)
Colour change 5 (Required 4(min))
Staining multifibre 5 (Required 3/4(min))
Solvent 5
Pilling resistance (IWS196)
Rating 5 (Required 3/4(min))